Question about Fisher and Paykel Washing Machines
...symptoms. Keeps blowing fuses that are in line with pump. Can it be anything but the pump causing this fuse to blow? Yes the original bad pump has damaged the drain pump circuit on the control
...circuit which eventually burns out the fuse. The drain pump must be checked first for such condition and replaced if necessary before replacing the fuse or the motor control board for that
Question about Fisher and Paykel Washing Machines
...know power. Check fuse. Before replacing fuse, check water pump connections. Your replaced water pump should be identical in design. If wattage rating is more, increase the fuse rating slightly
Question about Fisher and Paykel Washing Machines
...found the fuse for pennies vs. hundreds for a new motherboard. i'll still replace the pump, but is there anything else i should be looking at? Maybe the pump got jammed and stalled and blew the
Question about Fisher and Paykel Washing Machines
fuse on the motor control board as mine did before I replaced the pump... Did you replace the pump yourself or had a service man do it? If you had someone replace the pump, a return warranty servicve
...pump and fuse, as well as including the new in-line fuse supplied with the new pump. Now as soon as the machine is plugged in, the pump starts running and will not stop. Also getting diagnostic code ...
...wrong place. It could be the pump that has blown the fuse on the board, Was the pump making loud noise at the time when it died. if so replace pump and fuse. Get a technician to replace these
Question about Fisher and Paykel Washing Machines
...the washer had power again. When I started to wash a load it lost power again. What will cause it to blow the fuse. Pump Ohms to low blowing fuse & seal is leaking. The pump will need
Question about Fisher Washing Machines
...pump replaced 3 times, during which, the new control board with fuse bypass was installed to prevent the board from blowing again The drain pump on my F&P IWL16 is leaking water. I've had ...
Question about Fisher and Paykel Washing Machines
...fuse to replace somewhere?! Not sure if it's for all models? Just newer ones? the fuse is most likely on the back of the front control panel. Personally I would just replace the faulty part and if it ...
247 questions posted
Usually answered in minutes!
1,514 Questions
88 Questions
87 Questions
45 Questions
22 Questions