Fisher and Paykel GWL11 Top Load Washer "setting clock old" Questions

...old timer with things (prongs) that you have to push/pull?! These types of timers were used and are still used for many different devices. The dial represents the clock and you pull or push for the ...

...do you have spark Ignition for oven of just top. Glow ingnitor. Do you have a clock that has a setting fo keep warm or end of cook time. You could be locked in keep warm(20 +yr old oven with

...old style clock programmer and they have a service life after which the points activated by the cams and they pit or burn and the controller becomes unreliable in operation you do not mention a make ...

...old; machine does not cycle from wash to drain to rinse to drain to spin automatically - I have to stop it and turn the dial to the point where this would happen (sort of like manually setting the ...

clock', turn on the electric and go to bed. In the morning the timer has moved on correctly but the washing up machine hasn't worked, Have you any suggestions? I have tried to ring Neff on the numbers

...old GE machines. Alas, no more. The newer GE timer must be replaced if the teeth are stripped. Be careful not to damage the indicator dial when doing this repair as it is about $20 for a round piece ...

...old. Never any problems. Stopped spinning the other day. Clothes are sopping wet at end of the cycle. Will not engage spin mode at all. I don't even know where to begin to self diagnose. Any ...

...old like I am. Just be careful not to damage anything if you do decide to lay it on its backside and remember the clock is ticking oil will go out of the tranny albeit slowly whilst the washer is on ...

clock wise? Please help. Thanks you need to completely remove the drum assembly from the machine, place a piece of wood through the rear spindle and undo the nut, wiggle spindle and it should come off

...clock does not count down but left on, the dry thinks it completed and the wrinkle free alarm sounds and then it ends. I opened the unit and the belt is fine, drum spins manualy and/or if I spin it ...