Fisher and Paykel GWL11 Top Load Washer "motor sounds" Questions

... but agitator starts out fine then makes terrible sound and quits agitating. Continues through "cycle" then also doesn't spin. Sounds loud! check your motor coupling, it is between the motor and ...

...sounds like. Your motor may not be shutting on & off It may be trying to start. Most motors Have a start capacitor & a run capacitor to help them turn. They do exactly what they sound like Start cap ...

panasonic washing machine na-f65b2 washer motor issue having sound Hi, ------------Type: panasonic washing machine na-f65b2----------- My washing machine washer motor (C10 to C13) is having scratching

...to stop then speeds up. Now stopped mid-cycle. Is it the motor? it sounds like the brushes are on there way out in the motor, check numbers from the motor and you can buy them on line ..hope this ...

...drain, but unable to complete wash or rinse spin cycle. The humming sound is coming from the drive motor running but unable to drive the agitator nor the basket to spin. The drive motor is

motor begins to run slow and sounds as though something is dragging. These motors need a good supply of cooling air so it is important to keep the ventilation system clean. Without lots of cooling air

...sounds like the motor bearings are bad which would require motor replacement. but, thats normally not what cause the " not completly turning problem" your having. general thats cause be the motor ...

motor. So I have to think this is related to the brushes. It sounds like the gap has gotten too large. Any ideas? You are quite correct in thinking that it is the motor brushes that are worn. You need

...Whirlpool Estate TAWL600W will not drain, agitate or spin. Instead it makes a humming sound like a motor under heavy load. Is this a gearcase or motor problem? hello it sound like the brushes on the ...

...inlet screens but the motor still sounds like it is binding Try renewing the Start / Run capacitor, especially if you hear a mains hum. Other than that, have you checked the motor brushes for