Question about Fisher and Paykel Washing Machines
...cold and hot valve is faulty. The most likely cause is that the valve harness has not been connected correctly or the valve(s) is open circuit. Primary Source: Wiring. Action: Check the valve ...
Question about Fisher and Paykel Washing Machines
...cold and hot valve is faulty. The most likely cause is that the valve harness has not been connected correctly or the valve(s) is open circuit. Primary Source: Wiring. Action: Check the valve ...
Question about Washing Machines
...start flashing red. the washer still drains and spins. it could be a water valve fault. is it set to cold only or hot only or warm? if warm try cold only or hot only to see if it is a valve
...cold and hot valve is faulty. The most likely cause is that the valve harness has not been connected correctly or the valve(s) is open circuit. Primary Source: Wiring. Action: Check the valve ...
...relay on the cold tap has failed or the hot water is not that hot so no cold water is being let in to cool it down,,, the worst it can be is there is a program fault that is holding the heaters
Question about Fisher and Paykel Washing Machines
...cold it pulls in hot Code F05 but if I shut off the hot water and set the maching to cold wash cold rinse it won't rinse unless I turn the hot water value on not sure on that one most machines are ...
Question about Fisher and Paykel Washing Machines
...cold and hot valve is faulty. The most likely cause is that the valve harness has not been connected correctly or the valve(s) is open circuit. Primary Source: Wiring. Action: Check the valve ...
...hot water only. Cold or warm wash pulls no cold water. Water pressure is fine, no pipe kinks. Could inlet valve be stuck? Any other possibilities? Hi just read your posting.Now have you removed the ...
...hot. Cold water is not mixing with the hot water. Can you tell me which part is most likely responsible? Thanks... Turn off the water from your hot water valve at the wall. See if you get any hit ...
...H.Please reply with answers to all the questions and I am sure I can help you with this fault.Looking forward to your reply. Set for cold/cold. Cold hose is set to cold tap and hot hose set to hot ...
1,828 questions posted
Usually answered in minutes!
200 Questions
88 Questions
87 Questions
45 Questions
22 Questions