Question about Fisher and Paykel Washing Machines
...balance switch issue or something else. Do you have lights 3,5,7 and 8 on when it's beeping It's error code 43. 43. (00101011) Phase 1 to 6 - OOB Switch Fault The Motor Controller module has found ...
Question about Fisher and Paykel Washing Machines
...balance switch for corrosion and replace if faulty. Your out of balance switch is under the big yellow motor controller OOB switch Is where the grey plate is on this picture. Hi I have a smartdrive ...
...balance switch assembly. Either the switch is welded together and doesn't trip for the machine to cut out when an out of balance condition occurs or the switch lever is damaged or dislodged. The out ...
Question about Fisher and Paykel Washing Machines
...your out of balance switch is open circult.out of balance switch is located under control module.test for continuity on switch.make sure power is turned off first.if u have problems reply 4 more ...
Question about Fisher and Paykel Washing Machines
...& continues to do this until it stops completely & machine starts beeping, Check the out of balance switch (under the larger Grey board) for corrosion on the terminals and replace if
Question about Fisher and Paykel Washing Machines
...off. Do you know what may be wrong with it and if it is worth fixing? Many Thanks J Check the out of balance switch (under the larger Grey board) for corrosion on the terminals and replace if
Question about Fisher and Paykel Washing Machines
...off for several minutes this stuck pattern repeats itself. What is the likely problem? Sounds like your out of balance switch is corroded. It is located underneath your gold motor controller
Question about Washing Machines
...balance switch is faulty. it is located under the control module at top of unit. 80 to 90% that is the problem. could also b rotor sensor or worst case, control module. if u r confident and have an ...
Question about Fisher and Paykel Washing Machines
fisher and paykel kelvinator II smart drive 501 washing machine stops washing mid wash Check the out of balance switch under the blue motor controller for corrosion replace if corroded.
Question about Fisher and Paykel Washing Machines
...balance switch indicates that the switch is permanently on or the harness to it is disconnected. Primary Source: Mechanical. Action: 1) Check that the out of balance switch is free to move. 2) Check ...
1,828 questions posted
Usually answered in minutes!
200 Questions
88 Questions
87 Questions
45 Questions
22 Questions