Eddie Bauer Lightweight Travel System 01-750-AFD "apart stroller" Questions

...apart to clean it. Some stroller seat pads do not come off so if they are very dirty you can spray some shout on it and wash it with hose outside then lett it dry,I had to do this with a bob I found ...

...apart the stroller so i can wash it and how to put it back together you will have to unscrew it from frame in places some parts just undo but if you do take it off look carefuly where all the screws ...

stroller NOW! Any suggestions. I don't know how much I can dare try to pry the pin apart for insertion and then try to squeeze it closed again--?? you shouldn't have to pry them apart most cotter keys

You need to release the red clip that holds the stroller closed first. Look around for that. Then, pull the parent handle and one of the child trays apart until the stroller locks in the open position

stroller? there should be two clips on that side that come apart then it should fold in half There should be two clips on either sides of the stroller,squeeze them together and it should fold if there

...umbrella stroller We got a graco stroller used at a consignment store and took it apart to wash it and now can't figure out how to put it back together again. You can do this go slowly and be

...stroller. Took it apart to wash the fabic components and cannot reassemble it. Help! You can get a free user manual and check the FAQ's on this link; https://plweb.evenflo.com/replacement_parts.aspx ...

need to take my quinny buzz frame apart where the seat slots into the chasis but have no idea how to take it apart?? Hi Push down the grey levers on either side of the seat unit and it will lift out ...

...apart. These are the instructions for cleaning: • To clean stroller fabric and seat pad, use a sponge or damp cloth with cold water and mild soap. Air dry only. Do not use harsh household cleaners or ...

...stroller frame's collapsing lever has lost some screws ...so the housing around the lever is coming apart. Can I get a replacement for the lever housing, or replacement screws? It would be a shame to ...