Denon AVR-2803 Receiver "faults sound system" Questions

...system sound is on. I know the connections work because at times the home theater system works beautifully. The system switches between components for the home system. I reinitialized and reset, but, ...

...system dav-dx155/dx255/dx315 wont open no sound but starts up ! then says protector push power Protect mode will kicking whenever a fault is detected. Causes that can start protect mode are: ...

...sound is still happening from the same side, have a look along the speakers cable path. Is the cable running along side any power cables or extension leads or is it near any wall warts or mains ...

I lost Audio output Device Compute says nooooooooo, my fault tampering with the programmes. Now lost all my sound and system says no audio devices installed. Diving me mad.....How do I fix it pls Jo

...DVD and TV. It is connected but it doesnt make sound. bad amp this riddled with faults bad design dont waste your money on this dump it i repaired loads of these this model is bad news and un ...

...system no longer has sound. When the radio was first turned on, it would take approximately 5 minutes until there was sound coming from the speakers. This got progressively worse until it would talk ...

...sound from optical or coax digital inputs Back ground: Had system for many years with no problem. Just got a Topfield PVR and decided to use the coax digital input for the audio (as it was not being ...

My technics new class A system won't produce sound All working and graphic equaliser is receiving music from cd player but no sound is being produced. unit is in protection due to a fault

sound, there is something fault. It can be inside the amp or outside to connections to speaker. If it cliks and shuts off/stanby, protection circuit inside it has the fault and should be rectified. To

...system. Has an orange light on the power button. But when pushed. Goes on then makes clicking sound then goes into protect mode. . What can we do to fix it? The amplifer goes into a "protect mode" as ...