Vulcan EF3 Deep Fryer "thermopiles bad" Questions

ON GOING I HAVE IFS40 AND I HAVE THE THROMPILE REPLACE3 TIMES IN 1 YEAR AND IT IS OUT AGAIN RICK Some one needs to take a millivolt reading on the thermopile. There are different types. But I believe ...

...Thermopiles consist of several junctions of which only some may go bad causing low millivolt output. Millivolt output with the thermostat off and pilot lit should be around 600 millivolt, you can ...

what would casue the pilot light to go out when the burners shut down 1.bad thermopile, 2. insufficient gas pressure, 3. thermopile not receiving enough heat from the pilot flame.

Imperial Fryer Pilot Won't Light IFS50 The gas valve, thermopile, and high limit are new. This unit worked fine for about 1 month. Maybe bad thermopile again???? For sure if you got gas to the ...

how can i check if its a bad themopile or gas... n my experience, the thermocouple (you called it a thermopile) is usually the weak link that fails, and is also the least expensive to If you had a ...

my pilot light won't stay lite,replace thermopile and still doesn't stay lite. my pilot light won't stay lite,replace thermopile and still doesn't stay lite. Hi there. Check ...

bad. You can clean and check the connections, and test it again. Otherwise, spend $20, and replace the thermocoupler. (thermopiles $50) Reason is, a gas valve will likely cost $250 or more. Good luck

fryer comes on gets to temperature, then after a varied amount of time depending on use will power down, and will not come back on to maintain temperature, or will occasionally come on, but not to ...

Keating fryer won't stay lit Hard to light, onxe we light the pilot and try to start the pre burners it blows out most of the time, when we do get them to lite it takes a long time for main the 4 main

ifst-25 will not stay lit Could the thermopile be going bad? Clean pilot check thermopile should show 600millevolts