...to Drain (2 min cycle) it drains and cycle ends, but the door doesn't unlock. I have checked the filter, it is clear and turning freely. What should I try next? i would think about replaceing the ...
Question about Kenmore Washing Machines
...cycle not exactly stopped, but been running an hour or more so far. Set on Perm Press (10 mins) over an hour ago. Agitator works for 2-3 cycles then stops for 10 or more mins. After an hour, timer ...
Question about Washing Machines
a cycle? Set for the 10 min Perm Press cycle. Agitator moves for 2 or 3 rotations then stops for 10 mins or more. So far gone from 10 - 4 mins but took over an hour to do so. Mechanical timer. Replace
...like to either completely stop this cycle and start anew or continue with the cycle (had started about 2 min before adding article). Try unplugging the machine for a few min's and see if it
Question about Electrolux Washing Machines
...2 min and turn it on again then machine can run but it will stop again within 4-6 min. What is problem with my washing machine? How can I should do? Thanks, Natty. Unplug it wait and reset try ...
...2 mins before the end of the cycle. i now can't open the door, and it won't drain or start again. please can you help? there may be something small that has stopped the pump from draining.use a shop ...
...cancelled the cycle and drained water (14 mins left). Booklet/instructions doesn't really cover error 2 !? HELP :) http://www.fixya.com/support/t10143344-hoover_ Hi take a look ...
...2 pkts of bicarb of soda in the empty tub.Start the cycle and let it fill and then let the machine wash for 5 to 10 mins.Do not let the water drain out.After 5 to 10 mins stop the cycle and let the ...
Question about Whirlpool Washing Machines
...2 brand new duet sports wfw8300sw04- They both will start the wash cycle, run for about 7 mins and stop. The pump kicks on and drains the tub. At this point the add garment and wash lights blink for ...
Question about Washing Machines
...2. started cycle and heard a pop as safety switch operated. 3. reset safety switch. 4. started cycle (i.e. press front panel power button) and washed load as normal. 5. when wash over the door would ...
152 questions posted
Usually answered in minutes!
99 Questions
66 Questions
56 Questions
46 Questions
40 Questions