Sansui TVS2750 27" "horizontal 1 line crt" Questions

...HORIZONTAL LINES. called retrace lines please check 1 screen control on eht transformer is mituned 2 supply to screen of crt 3 supply to rgb video output is absent 4 connector loose 5 crt base loose ...

...horizontal green lines (spaced evenly 1 inch apart) over the tv screen. Particularly noticable on dark areas of screen. It's a CRT Tv - about 4 years old. It seemed to start after power blips a few ...

...1" green horizontal line in the center of the screen. No problems with the audio. Any help would be great! Bad vertical output ic.  Also, check resistors and diodes around vertical output ...

1.- Are lines overimposed to the normal picture? 2.- Horizontal lines? Maybe slanted or diagonal. It looks like you have screen voltage problem. Or 185 volts is too low for driving the 3 (red - green

...1/4 inch horizontal line across your screen, this means that something in your vertical deflection circuit has failed. This could be the vertical oscillator, the vertical output processor, the ...

...horizontal lines, spaced about 1/2 inch apart. Also, the picture is excessively bright. When bright is turned to the lowest setting, picture is still overly bright. Thjeres a problem with the screen ...

...horizontal lines in upper 1/3 of screen on Sony KP-61S75 Just tonight, 3 horizontal yellow lines appeared. They do not go completely across the length of the screen. We are on cable-checked another ...

...horizontal lines appear in the upper 1/3 portion of the TV screen. When they first appeared, when I turned the tv off and then back on the lines would eventually go away. Now the white horizontal ...

white horizontal line between it. what could be the problem? 1. solder the vertical ic first. otherwise replaced the vertical ic. 2. solder the yoke wires. 3. replaced the vertical ic supply capacitor

...horizontal line across the display. Dry joints and missing vertical output pulse from vertical oscillator ic also could contribute the same symptom. If you discovered that the protection resistor ...