Hoover HDC6 Electric Dryer "condenser tumble fault" Questions

...tumble. Condenser water light fully on but there is no water in the resevoir Make sure the condenser is pushed back in palce correctly. If tghe eoor persists then tun off the AC power to the machine ...

...condenser tumble dryer drum wont turn tumble dryer drum wont turn and ''empty water light'' permanently on. You need to check if the belt is o/k. Remove top cover, and grasp belt, it should be firmly ...

...Tumble dryer condenser not heating up,done it before about 5 years ago and it was in warranty so engineer changed i think was capacitor. Common faults - 1 The heating elements can fail (meaning open ...

...tumble dryers to stop heating up is the thermal overload cut-out devices. These are safety devices, and are some times "single-shot". That is, if they operate, and shut off the heating element, then ...

tumble dryer is staying on even though the water container is empty. Consequently, the dryer is not heating. I have thoroughly cleaned the filter and condenser. Any suggestions? ANNE could be a switch

hoover condenser tumble drier keeps setting off trip switch after running for 10 mts. filters all clean and have checked fuse help! Poss. element fault , going to earth , call service agent to check.

...condenser tumble dryer is only giving out cold air. it is not heating up? This sounds like the thermostats ForAll Your Appliance Video Help Visit Apart4u video tutorials see other tumbledryervideos ...

...condenser dryer. We have a full video library on appliance repair video?s Common faults - 1 The heating elements can fail (meaning open circuit) 2 There are cut-outs (T.O.C's) that might need ...

...condenser tumble dryer! Its been leaking from underneath the dryer when in use and not draining sufficiently into the top tray!..what could be causing this? Plugged filter, screen, or drain. If you ...

...condenser dryer is taking 5 - 6 hours to dry the clothes. it is a 7kg indensit dryer Common faults - 1 The heating elements can fail (meaning open circuit) 2 There are cut-outs (T.O.C's) that might ...