Hoover U5344-900 WidePath Vacuum "cleaning powerhead" Questions

Powerhead Keeps Shutting Off My powerhead keeps shutting off and I have to keep hitting the reset button to start, as soon as I push the powerhead across the rug it shuts off again. Does anyone know ...

the meantime, you can try using the vacuum without the powerhead to see if it is still able to provide sufficient suction. This will allow you to continue cleaning until you can get the issue resolved

powerhead will not rotate Hi jjillSounds like you have a broken belt in the powerhead...replace the broken belt and clean the roller bearing area's of debris while you have it apart.Please take time ...

The powerhead brushes no longer rotate. The interior is clean and the belt is intact and in good shape. Is there something that I can check or do I need to replace the powerhead make sure elecricity ...

Filter Queen powerhead diagram My 7 year old son decided to take the powerhead apart to clean it, but went a bit too far. Now that it is all in pieces, I can't figure out where and how the spring goes

...powerhead? It appears to have a slot possibly for a coin turn to open? Hi there,To clean your Dyson DC35's motorised floor tool, please follow the steps shown in the video below. Although the ...

remove bottom of electrolux prolux upright vacuum. Hose is clogged. You shouldn't have to remove disassemble the powerhead. Lay vacuum on it's front. Between the tank and the powerhead is a black flex

...cleaning attachment, I think is called the power mate has a beater that is intermittently working now Your hose could be bad. The wires frequently go bad up by the handle switch. also could possibly ...

dc 45 powerhead not spinning - cleaned rollers, cleaned filter, emptied and cleaned bin Most likely a bad brush motor. You will have to replace the whole nozzle assembly. Dyson doesn't sell the motor ...

HI, My Dyson DC07 Is excellent When I use the hose, But it's not so good on carpets. There is no blockage in the bottom hose & all the filters are clean. Also the belt & roller are working ...