Hoover V1 SteamVac SpinScrub Vacuum "carpet cleaners recovery tank" Questions

...not collecting dirty water. my recovery tank is not collecting dirty water need answer on how to fix it? Thanks remove tank reajust and push down and clamp hoover carpet cleaner does not pick up ...

...recovery tank and now it will not pick up any water. Carpet is wet so I know water/cleaner solution is being put down. Please help yes please help0. my carpet is soaked and the machine will not **** ...

...carpet cleaner not picking up water Assure the ring gasket is in place under the hood. A round rubber gasket must be in place on the round tube under the hood where the recovery tank sits to connect ...

Hoover Steam Cleaner - dirty water is not coming up in the tank! My Hoover Steam Carpet cleaner problem: It's not picking up the dirty water. recovery tank (dirty water tank) not on correctly

carpet cleaner The recovery tank lid won't latch to the tank. I made sure the seal was clean of dirt/debris, and it won't quite latch. I've used the cleaner about 5 times. Hire a professional to steam

...carpet cleaners have a transparent vacuum intake so you can see the dirty water going in as you pull back on the return sweep. Check for clogs or a broken belt. I advise against using you cleaner ...

...carpet cleaner Might be a bad blower/impellar - you must disassemble to check. But most likely the lid on the recovery tank is not installed correctly allowing air (suction) to leak. On most models ...

...recovery tank rises to top when recovery tank is about 20% full.Thus we are only able to use the steam cleaner for about 2 minutes before having to empty the recovery tank. Ideas to resolve ? Your ...

...carpet, but there is no dirty water in the recovery tank. i must have done something wrong. how do i use this thing? The recovery tank lid isn't locked down all of the way around. The foam filter on ...

...carpet Two checks: (1) Is the lid aligned and sealed to the recovery tank (2) Is the round rubber gasket installed on the tubular post under the hood, where the tank seals to the base? The tube ...