Quartet gbc Shredmaster 5500S (Strip-Cut) Shredder "stopped going forward" Questions

...going forward, it clicked once then stopped. I thought something was lodged in it perhaps, so I took the screws out so that I could take a better look. I cleaned it thoroughly and set it back in the ...

Royal 9 x cross cut shredder wont go through even two pages thick This thing stops when paper thicknes enters the machine two pages or more. We have to go reverse forward, reverse, forward until the ...

...going forward. I have cleaned it numeroius times. Any suggestions? Thanks Check the bin switch. Pull the bin out and look for a switch that the bin pushes when the bin is in place. It may be loose or ...

Fellowes powershred 320 Works fine in reverse but won't go forward, tries to then stops. Shear pins in place all gears working, lights on. Any suggestions? Thanks Ken seems to be an issue with the ...

starts reversing automatically when beginning a new scan This has just started in the past week. When we go to shred a new document/paper, when the paper starts the shredding action, it begins by ...

...stopped working on forward and now only goes in reverse...any chance of a fix or does it need to go to the dump? please email me After seeing a suggestion for a similar post I got a can of compressed ...

STOPPED GOING FORWARD. ONLY RUNS ON REVERSE. 3/31/11 Your problem is same as mine. I took the shredder apart and notice that the first dented wheel moved by the motor is stripped. I called the product

my fellows schreddder JB01 has stopped going forward. I have cleared it and it will reverse. Blow some canned air down into the feed slot to clean the feed sensor

stopped working. There is nothing jamming it - what should I do? There was a load of paper stopping the blades from turning, but I've managed to dislodge them. The shredder can rewind/reverse,

...stopped. Power source is good.p Had been working ed. Does not go forward nor backward. Power source is goog. Does not work forward nor backward. How can I get it working? It could be there is still ...