Why is brush not picking up water A brush can not pick up water, I don't know what machine you have but most machines use suction through a floor nozzle to pick up water.
picking up water well it used to pick up the water great until i had to change the front piece because it cracked. now it only picks up water from the center and leaves the carpet really wet. I've had
Bissell 9300 2 x will not pick up water.What is remedy? First make sure it's putting out enough water. There can be enough water coming out to get the carpet wet but not enough that it picks up much ...
The Hoover Steamvac Widepath will NOT pick up water. The dispenser with cleaner DOES have water. The TANK that would receive the dirty water is NOT full. All tanks are on properly and the machine will
...water when picking up dry materials use the foam sleeve that slips on and the blue cloth (assuming there all blue) over it, there should be a ring that slides over blue cloth to hold it in place over ...
...the floor with out it picking up the water.. and after I scrub it, then I want to pick up the water.... Can't do it. The machine vacuums in both scrub and pick-up. Sorry. Kirk Thompson San ...
Won't pick up water from the clean water side Won't pick up water from the clean water side I couldn't view u'r clip but it seems if the pipe is blocked try to remove the blockage by using a hose ...
...picking any water up. Follow instructions HERE. If it is soapy water NOT FOAM coming out - make sure suds screen is installed. If you get mountains of foam and it is absorbed into the rug by the time ...
My shampooed won't pick up ythe water does your shampooer have a cap on the shampoo tank. Usually you take the cap off to let the shampoo out while shampooing and to pick up the water you put the cap ...
...picking up the water My Hoover is not picking up the water - it is a hot water shampooer. Thank you SEE MY KIRBY SHAMPOOING GUIDE... ...
122 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions