Hoover Company Wind Tunnel U53019 Upright Vacuum "roller turn" Questions

...turn on power, brush roller light comes on green and brush starts to roll for about 3 seconds and than brush freezes and light turns red try turning the roller by hand UNPLUG VACUUM FIRSTit should ...

...roller will not turn Try these steps: Check the button that turns off the roller brush to make sure you didn't press it by accident. Unplug the vacuum and clear pet hair and other debris off the ...

Roller quit working - but belt still attached try turning the rollers by hand,,, if they turn,,, can you hold the rollers and still turn the belt,,(dont turn on the motor) ,,, if so,, its the belt ...

...turn. But if you have the roller brush in on both sides, it doesn't turn. Is there a way I can get the roller brush completely off the vacuum? do we need to rplace the roller brush and how would we ...

...roller to not turn. Also make sure the roller brush is free of any debris. Use this link to access your vacuum to change belt or clean the roller brush. ...

...turn the roller. It is possible that the roller is in need of servicing. If the bearings in the roller are fouled with dirt and hair, they will not turn properly and a new belt will not solve your ...

...turn.The roller is about a year old and was working fine. The ends turn If the roller ends turn (are not jammed by hair etc.), then there are tthree things to look at: 1. Is the belt that drives the ...

...turn Roller will not turn. Have checked belt - removed strings from roller. Vacuum has suction, but the roller will not turn. try pushing the reset button..its a little red usually located on the ...

...turn the roller (which can't turn), and this generates a lot of heat in just a few seconds. You can find belts at places like Sears, Home Depot, or your local vacuum shop. For just the roller: Turn ...

...roller would not turn at all but is supposed to with no effort. on some models the end caps pop off but most are one piece and are just discarded and a new roller bought - seems to be $10-$20 for one ...