Magellan eXplorist 500 GPS Receiver "nand" Questions

Ad

Question about Magellan eXplorist GPS

1 Answer

Configure NAND on Start up When I start mu Explorist 500 this is what I see on the screen< "Press ENTER to configure NAND. Press ESC to cancel." When I press ENTER I get a message telling me ...

Ad

Error Message? "Press ENTER to configue NAND Press ESC to cancel" I turned my unit on one day to find the following message at start-up "Press ENTER to configue NAND Press ESC to cancel". The unit is ...

Ad

Question about Magellan eXplorist GPS

1 Answer

explorist 500 Whwn I turn on gps I get the message press enter to configure to nand press nav + power; then change the numbers 00 in 95 by using the joystick and and then press the joystick itself; ...

Question about Magellan eXplorist GPS

1 Answer

doesn't opperate when i turn power on, message says "Press ENTER to configure NAND Press ESC to cancel". If I press either Enter or Esc, the unit just goes blank and nothing at all happens. I had ...

Question about Magellan eXplorist GPS

2 Answers

...- yes - press enter Good luck! Did the software come with your purchase? If so, you can clear the nand flash and re-load the software. If you have the software let me know and I'll tell you how to ...

Question about Magellan eXplorist GPS

2 Answers

...the software on my XL? Thanks Ron G Error message at start-up reads: "Press ENTER to continue NAND, Press ESC to cancel". Either choice I seclect and the unit shuts-down. "With you XL turned

Question about Magellan eXplorist GPS

1 Answer

...battery shut unit off. I got new batteries now when i turn it on it says press enter to configure NAND press ESC to cancel. This shut the unit off if i do either i had the same problem you have to ...

Question about Magellan eXplorist GPS

9 Answers

...to confirm your choice. Confirm. The next time you power on your gps it will ask you to configure NAND flash. press enter (stiff stick pressed in) and it will do it's configuring. Power off (press ...

Question about RightWay GPS

1 Answer

...see the CoPilot.exe in the CoPilot folder? I had the same thing happen. Apparently the built in NAND memory can become corrupted. On mine, the GUI launches, one can see the file system, and it ...

...your units first screen is white and there is no logo screen or any legible images, then it's your NAND flash on your main board. The first image produced upon boot is the blue magellan screen. This ...

Not finding what you are looking for?
Magellan eXplorist 500 GPS Receiver Logo

47 questions posted

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...