Hoover U5720-900 WindTunnel Upright Vacuum "windtunnell quit" Questions

Hoover windtunnel..runs fine for 5 minutes then stops? Hoover windtunnel vaccum..when I turn the unit on cold runs fine, then after it warms up it quits? OK - sounds like your machine has a blockage ...

windtunnel quits picking up I have taken this thing apart, ran things through the hose etc. There are no other places to unclog! Everything works correctly, but no suction. Can't figure out what is ...

my hoover wind tunnel just quit while vacuuming. It is dead??? Two years old used about every other week? Any suggestions? Some Wind Tunnels by Hoover have a poor design in the switch on the handle. ...

Hoover Self-Propelled WindTunnel U6436-900 cable problem The Self-Propelled WindTunnel will not self propel. I am quite sure it has to do with the end of the cable line found just under the light. I ...

the suction is quite poor, also definite burning smell after normal use. we only have about 3 years would it be the engine I would check the drive belts for the beater brush and make sure the beater ...

the power button quit working Please click here to see the part diagram for the Hoover Windtunnel Self Propelled model U6446-900 Greetings from GoVacuum, For replacing the switch, you need to remove ...

how to replace a hoover windtunnel model #uh70040w cable rewind The cord does't return back, it is off. I pull it out until the yellow and red mark, and I felt a noice and then it stop working ...

My Hoover Windtunnel Mach 6.9 brush roller quit working. Upon investigating I found that the idler arm pulley was broken so I managed to replace that. Before putting the cover back on I see the ...

Self-propelled Hoover windtunnel (with bags) will not self-propel. Belts are all in order, but I am quite sure it has to do with the cable. How would I fix this and how does the end of the cable with ...