...Dirt Sensor vacuum repair My vacuum cleaner's dirt sensor stays red. Supposed to go green when carpet is clean. (I put in a new bag and cleaned off brush bristles.) Dirt Sensors are sensitive. It ...
...Dirt Sensor Dirt Sensor Light stays red continuously on my Hoover U6433-900 Wind-Tunnel Upright Vac. I checked for a sensor light/beam in vacuumed air path that might have gotten covered over with ...
...dirt sensor red and yellow lights stay on all the time now. I've had the vacuum for two months. The suction is still fine, so I assume it's a sensor problem. But if this is a main feature of the ...
...dirt sensor on panasonic bagless vacuum Dirt sensor is stuck on "Dirty" Have cleaned the sensor according to Operating Instruction manual. Still stuck. Did you check to make sure there ...
dirt light always on The dirt sensor probably has dirt stuck on it. You will have to disassemble machine to clean sensor
dirt sensor The dirt sensor on windtunnel supreme doesn't work anymore. It is a bagged windtunnel. The sensor remains red. The sensor remains red.
dirt but have not solved the problem. The sensor may be bad, or it may be coated over with dirt. Re,ove the hose at the back of the vacuum, the head of the sensor is down inside that opening, reach in
sensor dirt sensor light seems to be stuck in red There is an optical sensor inside the port where you attach your vacuum bag. Take the bag off and take a clean soft cloth and wipe inside the port to ...
...dirt sensor" in the upright Where is the "dirt sensor" in the upright Windtunnel bagless? If I could see a parts breakdown, then maybe I could clean this one If you look at the rear of the ...
dirt sensor stays on green. Goes on red for about 5 seconds then green. Can clearly see the floor is dirty and it is picking up stuff. ahh the good ol electronics on vacuums selling the product again.
29 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions