Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum "wind tunnel 6" Questions

...wind tunnel air UH 72400 has the brush roll button , it is on and when I first start vacuum the brush starts spinning and then stops. I have cleaned the brush, the sides If the belt is over 6 months ...

Wind tunnel vacuum http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=831441 Generic problem for all Vacuums How to replace belt on Posted by dinosir on Jul 25, 2008 How to replace belt on Hoover

wind tunnel doesn't turn Was running fine - stopped for a moment to move something while vacuum was still running and when I went to start vacuuming again the agitator bar stopped turning. Cleaned the

Wind Tunnel in January 2008. At first it worked great though very noisy. Now it will not pick up small fuzz on medium shag carpeting. I have checked the bag, the filter, the belt, and obstructions and

Wind Tunnel - Belt Keeps Coming Off I replaced an old, worn belt with a new one (same part #) and it works for about 5 minutes before the belt falls off. It's coming off the thin steel bar in the back

...Wind Tunnel ON/Off Switch My Hoover Wind Tunnel Bagged Vacuum is about 18 months old and used maybe once every couple of weeks. the on/off switch has totally quit working. the only way to turn it ...

wind tunnel cyclonic U5780900 1 year old. brush will not turn. too much slack in vbelt when in carpet position. Belt is good Well, the V belt is normally fairly slack until the handle is dropped below

...Wind Tunnel Bagged Upright. The best way to install the belt on a Hoover to replace one or both of the belts @ the same time for the best cleaning. The average belt change is every 4 to 6 months for ...

I have a Hoover TurboPOWER 7300 Windtunnel V2-belt change I need step by step instructions to change the belt... thanks!! 1. Remove the 4 screws holding the bottom plate. 2. remove roller and old belt

...Wind tunnel supreme, loss of suction Hello, I purchased two of these modles in late 2007 and after changing the bags on each of them I have little to now suction with the vaccum. The hose is fine and ...