...may be broken. If the part that engages the brushes turns but won't turn when the brush strip is engaged then one of the parts that mate up it most likely stripped. Let us know what you
Question about Hoover Vacuums
brush block assembly. Try turning that drive shaft connected to the middle brush. All the brushes should be able to do a full turn simultaneously. If the brushes get stuck and cant make a full turn or
agitator brushes wont turn even after cleaning hoover steamvac f5914-900 agitator brushes wont turn even after cleaning filter. the brushes will not turn even wen the switch is turned on the gear that
The brushes do not turn when the unit is on. What do I do? The belts appear to be fine, Is there an internal fuse? check belt if ok .may be brushes motor bad.... Unplug power before trying this test !
...brush turns fine, what I suggest is put another belt on, and before you close it up, turn the brush with your fingers. The brush should turn. If not, and I have done this myself before too, the belt ...
turns the brushes. Turn the Hoover carpet cleaner over, and inspect the brush area. Debris, strings, or pet hair may be tangled in the rollers, keeping them from turning. Use a pair of scissors to cut
...turning. The brush bar on my dyson animal control stopped turning. I was starting the vacuuming and the bar stopped turning. I cleaned off any strings before I started vacuuming too. I turned the ...
...turns on and off the brush!!! Good luck!!! I accidently one day bumped that button and couldn't get my brush to work but after troubleshooting it, that was my solution. you can but you will have to ...
watched the motor turn the metal spindle that the belt rests on, and the belt turns as well. The belt is stretched and needs replacement.(Belt # 38528036) . The brush is not turning against resistance
5 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
