Hoover U6630-900 WindTunnel Bagless Upright Vacuum "drive cable" Questions

Ad

Question about Hoover Vacuums

1 Answer

drive mech. Also the cable may have broke, if you look down on the right side, you can see the cable, did it break there or is the #34 actuator(#43143046) that the cable attaches to broke. The cable (

Ad

Question about Hoover Vacuums

1 Answer

...drive cable or actuator arm. Put the handle down and move the power drive handle forward and backward. If it moves freely watch by the headlight for the cable to move the actuator at the base. If the ...

Ad

Question about Hoover Vacuums

2 Answers

cable connected to the arm of the drive and will move back and forth with the top handle. Sometimes, they break at this connection. The cable may be frayed and broken, or the acuator arm may be broken

...drive cable hasn't broken also the drive actuator arm, alot of times it breaks off where the cable attaches to it. If you watch the cable down below, pull the handle up and down to see what the cable ...

Question about Hoover Vacuums

3 Answers

...cable itself. always work the power drive smoothly or things will break. also could be that the smooth belt is stretched and will cause the same problem. belts should be replaced every 4 months. good ...

Question about Hoover Vacuums

1 Answer

...drive cable has broken away from the old actuator; just try to get the new actuator arm as straight as possible. Using the handle and while observing the cable moving back and forth through the ...

...Cable Roofing nailer rn175a My gun drive rod is not retracting, it fires fine but will not retract. Replace the O Rings and the trigger valve assembly. 9/10 sticking rods on the Porter Cable guns is ...

Hoover Self-propelled WindTunnel U6436-900 cable I do I get to the cable that controls the handle? Self-propel will not work? the belt could be broken. check the belt for the drive system.

...drive transmission works in both directions. If they do not, then the metal cable connection (under the hood) that connects the handlle grip to the transmission, may be slightly out of center ...

...won't spin. Do brush rolls wear out? I took the top of the vacuum apart and found the cable that drives the wheels was broken. I am going to order a new

Not finding what you are looking for?
Hoover U6630-900 WindTunnel Bagless Upright Vacuum Logo

243 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...