Hoover SteamVac F5914-900 SpinScrub Upright Vacuum "vacuum cleaner hard push rug" Questions

...up making it hard to push the vacuum forward. I found an article that may help you. http://ths.gardenweb.com/discussions/2283388/vacuuming-oriental-rug For more help check us out at: Persian Rug ...

...vacuum itself. As lightweight area rugs are not fixed to the floor, it's possible for the rug to lift and seal against the soleplate of the cleaner head, due to your DC25's powerful suction. As this ...

...perfectly flat on the floor while I vacuum. Or, you can turn off the brush roller (set it to "hard floor" setting). Or, tip the vacuum cleaner's front up slightly while vacuuming, to reduce

...cleaner head. I'm sorry to hear you're having difficulty pushing your machine forward on this particular type of new carpeting. If your DC33 worked effectively before the new carpeting was fitted, it ...

...vacuum cleaner, and pulling the carpet out of the cleaner head - it doesn't go in far, just enough to stop the brush bar. It doesn't seem to occur on heavier or better fixed in place carpets/rugs. ...

...cleaner. If you want to vacuum a hard floor or a delicate rug, you can turn the brushbar off using the silver brush control switch. It's important to note that the brushbar will never rotate when ...

hard floors on most Oreck vacuum cleaners. If I were looking at it, my guess would be to check the brush to see if it is still on the new brush setting or if it is on the used brush setting. To figure

...vacuum cleaner is unplugged, and turn the vacuum cleaner upside down so the bottom plate is upwards. It's easiest to do on a work bench or counter top. Step 2: Unscrew the two metal screws on the ...

...vacuum cleaner by the handle of the machine rather then using the carrying handle on the back of the vacuum, it causes too much tension on the actuator arm, and will cause the cable to rip right out ...