...Noise coming from bottom of vacuum? I cleaned the roller brush Depending on what vacuum you own it could be various problems. First place to start is pull the end caps off the brush roll if possible, ...
...noise in vacuum cleaners. Hopefully you should be able to track down the problem. http://www.ehow.com/how_7493926_fix-noise-vacuum-cleaner-motor.html If you need further help with repairs, please ...
Question about Vacuums
...If the high pitch noise is coming from the motor, you have a clog Ball bearing going bad, most likely it got clogged and melted housing now belt is loose that’s why you hear that ...
...vacuum still picks stuff up but the noise is unbearable. This problem started happening after I emptied out the canister one time. Sounds like you may have a clog or restriction somewhere in the ...
...noise coming from the belt area, ie. beater bar, or does it sound like it is coming from the motor itself? It is possible there is something caught in the brush roller. When you turn the roller off, ...
Question about Kenmore Vacuums
...noise coming from the vacuum. also doesn't pick up Loud noise comes from vacuum when i turn it on. Doesn't pick up everything and sometimes spits the debri back on the floor. Check underneath, behind ...
noise could be because the vacuum is loosing airflow. does the red light come on on the top? if it does ot emptythe vacuum, replace the cone filter, the secondary filter, and the batting in the top of
...vacuum there is no more noise? Please help me thank you Your belt is worn and stretched and so it is slipping on the motor drive shaft. That is why it is noisy and smells like burning rubber. You ...
Question about Vacuums
noise. There also could some hard water debris within the vacuum chamber which pounces around during the boiling process, such as the same when a water heater becomes old and hasn't been drained. Hard
Question about Vacuums
...noise coming from the brush or in the lower unit, the vacuum is good, the noise sounds like a bearing going out? See if the bearing for the roller is available, contact a local Vacuum cleaner repair ...
1,019 questions posted
Usually answered in minutes!
388 Questions
262 Questions
179 Questions
146 Questions