Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum "vacuum powerhead working" Questions

Electrolux Epic 6500 Powerhead Motor The cannister works but not the powerhead. When I took it apart I found the motor rusted and it will not turn even the slightest bit. Where can I find a motor ...

...vacuum was running fine but the powerhead kept going off. I would make a sweep with it and powerhead would be running and then next sweep powerhead would shut off. I had tried checking connection and ...

...vacuum. Both the motor and the powerhead must go together. Check it up. Leave the motor wiring connection intact. Just tinker and check the powerhead wiring connection . anyone needing parts? got 3 ...

...powerhead brush died. The vacuum works just fine, but the brush doesn't. there could be 2 reasons for this problem. one) the powerhead is dead legit as in there is no power coming to it or the motor ...

...powerhead does not work as well as the light. the canister vacuum does work. Some of these has a reset button to push on the powerhead. Check the plug at the end of the hose handle, is it pushed in, ...

vacuum cleaner's powerhead isn't working, but the motor is working and the brushes turn. What do you mean by no power? That the brushes stop turning on the carpet because of a lack of power (check for

parking position i simply cannot figure out how to use the 'convenient parking position'. Nothing seems to fit where the picture indicates it should. Can anybody help me? I think it only works on the ...

...vacuum). The fuse located under the grey clipped-on plate of the canister is blown. The fuse is soldered-on the board and would need to be changed (board or fuse). Not "user friendly" zone. Warranty? ...

...vacuum powerhead I have a Miele S251i cannister vacuum. The power head just stopped working while I was vacuuming. Can someone tell my what voltage should be measured at the plug which connects the ...

...powerhead will not run. There is no voltage from the canister to the hose. Vacuum still has suction. How do you get the canister apart? The sounds like powerhead motor either burned up, or the belt ...