Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and ...
Question about Bissell Vacuums
...not turning on. Vacuum turns on Bissel 1695 powersteamer - pump not turning on. Vacuum turns on (position II on switch), but no pump (position I on switch). bad switch or connecter at switch or
Question about Eureka Vacuums
...position, brush roll automatically shuts off. I've replaced the belt multiple times and made sure it is installed properly and aligned, but it has not fixed the issue. Can someone please ...
...position - does not lock Hi there, when I turn the lever / handle to put the belt in the off (red arrow to red arrow) position, it does not lock into place. Any suggestions? If it doesn't lock, then ...
...turn To belt off position Dial won't turn To belt off position its just very difficult to turn. I am a man and I find it difficult to turn the knob which involves stretching the belt. Not an ...
Question about Hoover Vacuums
...floor. Quit when you raise Vac in upright position. When in the upright position, they will turn off. However, if they do not turn when on the floor, your turbine may need to be replaced or
...turn to on position 5. turn on vacuum, roller still doesn't turn, what am I doing wrong When you turned the knob, did it turn easily or hard. If it was easy, then the knob part inside did not catch ...
Question about Vacuums
...turn, depending on the position of the switch. how is the position of the red marker int he water tank suppose to be, does that effect release to much water at the same time if its not position ...
beater bar does not turn and belt is good Are you sure you have the switch in position 2? The brush will not turn if the switch is in position 1 or if the handle is upright.
576 questions posted
Usually answered in minutes!