Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum "2 switch working" Questions

Ad

...2 can work with it since they all have the same switch. your carpet head is working from the sound of it so either it's just that the high speed switch (being pressed fully down) doesn't work or you ...

Ad

...2 speed switch. Now only works in high speed not low speed. Will a new switch correct or is it the motor Your vacuum is fine. The switch can either run at full speed or half speed. You are running at ...

Ad

Question about Kenmore Vacuums

1 Answer

...the vacuum continues to run in non-powerhead-activated mode. Sounds like you have wires crossed at the switch. The 2 wires coming in go to the center posts, 2 to the power head & 2 to the main

...2 years old A vacuum has a powerful motor with internal brushes that make contact with the rotor. If the brushes wear down or break apart, the motor will not function. Brushes can be damaged if DIRT ...

Question about Vacuums

1 Answer

...2 switch. There are some exceptions such as certain model Fasco fans. - When the pullchain controls both the fan and light, it is the three wire three speed pullchain mentioned above. It is a ...

...2 years. The on/off switch doesnt work. Local sweeper repair shop will not work on it for less than $250 because it is a Dyson. Can my husband replace this switch himself. The new swirtch is only ...

...2... Our vac works for a short time, then shuts off and makes clicking noise as if trying to restart again. Works after cooling for a while but for another very short time. Your suggestion on fix ...

Question about General International Vacuums

1 Answer

Switch on dust collector doesn't seem to be working. I have opened switch box and sprayed dust away Maybe you just need to clean the switch.

...2 torx screws holding switch cover assembly. Pop that cover assembly off and the little switch under the button is probably sticking. Play with it a few times and it should start working correctly. ...

Question about FilterQueen Vacuums

1 Answer

...2 SWITCH NOT WORKING OR TURNING ON THE MOTOR BUT MY # 1 SWITCH IS WORKING Start with the obvious--a lot of vacuums have a reset button, try that first. It could be a bad switch, or a wire has come ...

Not finding what you are looking for?
Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum Logo

577 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...