Hoover U5262-900 / U5260-900 / U5266-900 / U5268-900 EmPower Bagless Upright Vacuum "beater bar keeps stopping" Questions

...like that is wrapped around the beater bar(the long brush under the head that brushes the carpet) keeping it from turning. The belt that drives the bar is getting hot because the beater bar is

...beater bar on the vacuum. The beater bar bearings and brushes could be plugged with debris and/or the belt is simply worn out and needs to be replaced. Unplug the vacuum, turn it over and look for ...

...beater bar from rotating. When it is then switched on, this immeadiately places a huge strain on the belt which then snaps (quite often accompanied by a burning rubber smell) If you still have the ...

...beater bar actually turning when the power is turned on? Sometimes the belt is fine, but something is jammed and keeping the beater bar from turning. What about the section behind the beater bar, but ...

...beater bar). The beater bar should turn fairly easily and the belt should turn the motor armature shaft (now would be a good time to check the inside surface of the belt for grooves or damaged spots ...

...beater bar area and work you way inward. In certain areas if you look closely, you'll see little arrows pointing to the screws. These are the ones that will allow you to get closer to the innards of ...

...beater bar is not obstructed with hair, strings, etc. The bearings on beater bar can be checked by rolling them with your fingers. If they are locked up or don't roll easily have them replaced. This ...

beater bar does not work dyson DC07 it just stopped working,bad no sound. I have cleaned the filter and the brush and nothing is stuck. i still cannot get it to work. What now? If the beater bar does ...

...beater bar stop could be a broken engage bar as well. meaning when you turn the nob to hard wood or to floors it turns the beater bar off, but when you turn it to carpet it kicks it back on. the ...

...beater bar on a Dyson DC14? Hi, We are trying to troubleshoot a loud rattling noise that is heard when we use it on carpet. It sounds like the beater bar is hitting on something. We need diagrams or ...