Starbucks Saeco Italia Digital Barista Coffee Machine "flow meter" Questions

...flow meter or inlet opening. Usually it's the flow meter. The flow meter is connected to the intake opening on the back of the machine by a silicone hose. The other hose connected to the flow meter ...

...flow meter. If you have a restriction in the intake line the message will not go away. There is a flow meter inside the machine that measures water flow. If the flow meter does not spin when the pump ...

...flow meter is restricted with the usual chip of bean. The flow meter spins when the pump is moving water. There is a small opening in the intake side of the flow meter and this creates a jet of water ...

...flow meter or inlet opening. Usually it's the flow meter. The flow meter is connected to the intake opening on the back of the machine by a silicone hose. The other hose connected to the flow meter ...

flow meter was not working. The control unit was not getting flow information and after about 5-10 seconds it will just stop and blink all the lights. I replaced the flow meter and solved the problem.

...flow meter. If a debris gets into the receptical on the back when the water tank is removed, it flows to the flow meter and restricts or plugs the intake. Then when you try to flow water the pump ...

...flow meter and sensor: Open the machine and locate the flow meter and the sensor. Unplug the sensor and check the cables for any loose or rusty connections. Clean the connector and plug it back in. ...

flow meter that needs to be replaced. It has probably been plugged with a coffee chip (usual cause) when the water tank was off. If the flow meter is restricted water can't flow or flow fast enough to

Flow Meter near the pump which regulates water flow. They also call this the kick-back element. This functions by having a wire connection run from the Electronic Card to the Flow Meter where there is