Hotpoint 24 in. DWF32P Free-standing Dishwasher "display show 2h" Questions

...display "2H" is an error code which, according to Bosch, indicates service is needed on the unit. The code is different from "2h" (note the lower-case letter h), which is what would display when the ...

...show another error of "1" in the display, extremely long wash times, etc. **The first thing I'd suggest before attempting any repair is running an additional cycle while making sure the water ...

...2H" means two hours = 120 minutes, which the 2 digit display can not. If it is an LG and does not start when you fully close the door, you ~probably~have a failed or mis-adjusted door "latch" sensor. ...

display turn off after 30s. If after 30s or longer the Start/Cancel pad is pressed with the dishwasher door closed, then the Countdown timer displays "2H" and the dishwasher runs through the

...display that normaly shows the time now shows 2H which I think may be an error/problem code. Does anyone know what it means. Thanks Steve MY DISHWASHER TASTES OF SALT AFTER EVERY WASH .I HAVE RINSED ...

DISPLAY SHOWS 2H AND STAYS ON 2H ANY IDEAS Hello. First, try to reset the control board. There are 2 buttons with arrows underneath. Press and hold them both for several seconds, maybe a little longer

...2H on the display at start up and the dishwasher runs forever unless I do a forced "quit". Is the control module defective? Is it easy to replace? Cheers Hi, To answer your first question, in a word ...

...2H display , I'm inclined to believe it is showing the estimated time for the cycle. As far as the noise, I believe you are on the right track with the water theory, but without hearing it myself I'm ...

...2H on the display, it does not seem to matter which program is selected, the unit runs continually. It does not heat the water or finish any cycle. The washing tablet covers the dishes and is not ...

display that normally shows the time is displaying an code of 2H? On an LG, that means 2 Hours, (120 minutes) and is not an error code. On an LG with a symptom like this, I would arrage to replace the