Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher "fault lights" Questions

Ad

Start light flashing which means fault. What sort Start light flashing which means fault. What sort of fault am I looking for? Didn't actually find any fault, I just held the three buttons in together

Ad

Question about KitchenAid Dishwashers

1 Answer

kudx03ftss2 clean light flashing you have a heater fault if the light is flashing 7 times and then pause.  to clear the fault perform a key dance of   HEATED DRY - NORMAL 2 times, or HIGH ...

Ad

Question about Whirlpool Dishwashers

1 Answer

...light flashing wont start cycle, what does it mean count the number of flashes- this indicates fault ie will flash 4 times stop, flash 4 times stop. To clear fault, hold start button for 3 secs. ...

...fault was detected, the following indicator lights will be lit: POWER SCRUB PLUS = Heater fault REGULAR WASH = Water filling fault (over or under filling) RINSE & HOLD = NTC (temperature sensor) ...

...lights above them will flash. To end test program, press ON/OFF button. To check each program indicator light, press its button. To check Cycle Countdown display, Refill Rinse Agent light and REGULAR ...

...lights above them will flash. To end test program, press ON/OFF button. To check each program indicator light, press its button. To check Cycle Countdown display, Refill Rinse Agent light and REGULAR ...

Question about Dishwashers

1 Answer

...lights 3&4 Ntc fault f04 light 2. pressure sw stuck on empty f05 lights 2&4, pressure sw stuck on full f06 lights 2&3, N/A? f07 lights 2&3&4 heater relay f08 light 1. heater relay ...

Question about Whirlpool Dishwashers

1 Answer

...7 times, and continues to do this. What buttons can you push to stop this Yes this is a heater fault detection error. The unit may not be heating the water resulting in unsanitary dishes so the ...

Question about Bosch Dishwashers

1 Answer

...lights above them will flash. To end test program, press ON/OFF button. To check each program indicator light, press its button. To check Cycle Countdown display, Refill Rinse Agent light and REGULAR ...

Question about Fisher and Paykel Dishwashers

1 Answer

...lights for a fault code. I need more information to assist you, I am very good at these models and have service manuals with fault codes. All I need is what lights or code do you have and when? I ...

Not finding what you are looking for?
Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...