Viper RCVGC022 Remote Control "aux buttons" Questions

zenith remote 12416923 i need help to program my aux button on my remote i cant find documentation on it anywhere the aux button isnt always labled with aux on it. Especially on new and universal ...

...buttons don't work on AUX except for the volume and mute, how do I get it back on tv? Thank you My remote won't change from AUX to Tv and all of the buttons don't work on AUX except for the ...

What is the aux button on my remote you likely have an aux port on the product that the remote controls, it allows your device to open up the pathway to the aux port. eg if it is a sterio unit, then ...

...you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX. 4. Press and release POWER until ...

...Aux button will flash twice. You now have the A / Select / OK / Green button mapped on the Xbox360. --If you want to switch the A button back to default, just do the same sequence but this time push ...

...AUX buttons. 6) Once the power on the receiver turns off you have found the code for your device. Now press the setup key and the AUX light should flash twice and this will lock in the code. If you ...

...buttons light up and the aux mode light starts to blink. Then press the record button on the dish remote for 3 seconds until the aux mode button lights up and stays lit (it then stays lit during the ...

...buttons should turn off,only AUX button should be blinking now, -While AUX button is blinking enter in the remote code742 for the Marantz receiver and then press the # key (pound key.) Afterpressing ...

AUX. The INDICATOR LIGHT will blink then remain lit. 4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR

...AUX. The indicator light will blink then remain lit. Step 4: Enter the three-digit or four-digit code (depending on your GE remote model) for your device using the number buttons. After your code is ...