Reddy Heater-30-55,000 BTU Variable "blows" Questions

Ad

...wire at back on the control board terminals ome at a time, untill the one you get to the one that blows the fuse. If the wires check out good sometimes the thermostat itself can have a internal ...

Ad

Question about Honeywell Heating & Cooling

2 Answers

How do I clean a Honeywell Oscillating Ceramic Heater Black. I haven't used it in about five years and when I turn it on you can smell the dust. if you have a vac with blow on it , i would blow it out

Ad

Question about Goodman Heating & Cooling

1 Answer

burners ignite but then blow backwards w blower burners ignite but then blow backwards out the side once blower kicks on Check your exhaust flue. I think you will find a birds nest or something inside

Question about Vanguard Heating & Cooling

1 Answer

pilot light is too low - will not touch thermocoupler and ignite the pilot orfice is blocked needs taking out and cleaning or try blowing it with air , or place a tube on and blow down it with the ...

Question about Goodman Heating & Cooling

1 Answer

...circuit board to compressor all check out ok no shorted conditions hoever fuse on the boarde still blows when turned on what do you thing problem area could be disconnect the thernostat wires from ...

Question about Goodman Heating & Cooling

1 Answer

...I turn on the mercury switch on. Pilot light is on and has never turned off but the heater only blows cold air. The heater unit is external I assume this is gas . induced draft blower or

Coleman furnace running, won't shut off, blowing cold only Yesterday, we smelled something electrical burning - but couldn't trace it. The furnace was blowing hot air and it was almost 90 ...

Question about Coleman Heating & Cooling

1 Answer

is blowing cold air This must be electric heat. Gas heat don't blow unless the burners are on first. You must have a broken heating coil. Can you be more specific?If it's blowing cold air then a ...

I have a Martin SCF36M/SCF36MB fireplace with 1 blower that blows toward the inside. Something wrong here? I would love to have a 2 blower setup,FA2 in the manual, but will the same thing happen? if ...

Have three blinking lights that indicate pressure switch stuck open, when holding in the kill switch and blowing in and out serveral times into the hose from the switch to the motor, blowing in tube r

Not finding what you are looking for?
Reddy Heater-30-55,000 BTU Variable Logo

473 questions posted

Ask a Question

Usually answered in minutes!

Top Reddy Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

vince

Level 3 Expert

2530 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Reddy Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...