Reddy Heater-170,000 BTU Kerosene Deluxe "springs insert light" Questions

how do i check the pump not getting fuel The FIRST STEP in diagnosing any heater problem should be checking the output of the air pump. Determine the air pressure required for the heater model that is

burns for one or two minutes then stops. also giving a code 3 The FIRST STEP in diagnosing any heater problem should be checking the output of the air pump. Determine the air pressure required for the

my kerosene torpedo heater turns on but then it dies after five seconds REAL FACT is: If all individual components of the heater are at 100% but the air pump pressure is not on it's mark, then the ...

runs when started but won't stay running. I have a Reddy Heater R70DT that runs every time I start it but only stays running for about 20 min. I wait about a minute and it starts right up but only ...

porta heat 55 model 50137 does not work, fuel problems Can't get fuel to flow. Has good spark, but fuel filter is empty and can't figure out how to get the fuel to flow from the tank ...

starts then shuts off cleaned air filters, checked power to board REAL FACT is: If all individual components of the heater are at 100% but the air pump pressure is not on it's mark, then the heater ...

starts then shuts down REAL FACT is: If all individual components of the heater are at 100% but the air pump pressure is not on it's mark, then the heater WILL NOT continue to run! Air Pump Pressure ...

I have a reddy heater 40,000 btu it works with the top off and then when I put the top back on the fan hits it? what do I do the model numbers are r40 and rem40 its a 40,000 btu and its a kerosene ...

I have a 35,000 btu Reddy heater that won't fire at the spark plug but is getting a signal from the magneto. Is the magneto bad or does the spark plug have to be in the mist of kerosene to spark? ...