Reddy Heater-170,000 BTU Kerosene Deluxe "diesel igniting" Questions

Mr Heater MH75KT - won't start with diesel I bought a brand new Mr Heater MH75KT multi-fuel space heater, filled it with #2 diesel, and it will not burn. Igniter is throwing a good spark, fuel is ...

R.H. 40,000 kerosene/diesel salamander: sprays,ignites,blows 10 s blows 10 sec. shuts down. I put jumper across photocell wires ...no change. I changed from kerosene to diesel and this began. You said

been running #2 diesel and does fine. Now it wont ignite! Bad fuel? How do I clean from system? Your current purchase of fuel may have water in it. Go to an auto parts store and get a dryer/stabilizer

...are 2 yellow screws on the back that might need adjusting but dont know what they do Also I use diesel not kerosene Fuel not a problem. Wrong pressure definitely a problem. Click here for ...

I have an All-Pro 50k kerosene/#1 diesel heater. It will only ignite if I have the whiole top cover off. If I put the cover back on the flame goes out. It sat for 3-4 years. It has new diesel in it. ...

HARD START AND BLOWING SMOKE We have a kerosene (currently using diesel fuel) forced air heater that has recently not wanted to start and when it does it blows a puff of black smoke. What kind of ...

...ignite fuel I cleaned the fuel and air lines. I replaced the rotor and blades. I put new off road diesel fuel in it. I can see it spray fuel but it will not ignite the fuel. Serial # 015234420. ...

...spark and fuel, replaced but that did not work. It has got real cold here recently and I was using diesel so i switched it to K1 but nothing is working. Any help would be

i have reddy pro 170 i plug it in , the fan & igniter comes on for 10 to 15 seconds then shuts off ,blew through fuel line and nozzle still same result, i do see fuel mist coming out nozzle ,i dont k ...

...uneven even after it reaches full temp. I hope you are burning K1 kerosene as opposed to off road diesel. Diesel stinks no matter what you do to the heater. A couple things that have happened to me ...