Question about Baby Lock Sewing Machines
...bobbin thread is showing while embroidering While embroidering my bobbin thread is coming up and showing up in the design. It has not done this with the other exact same items I have embroidered Your ...
...bobbin thread keeps coming to the top of my fabric during embroidering on my Singer Futura CE350, I've tried bobbin embroidery thread, regular embroidery thread and clear nylon thread, I've tried ...
bobbin thread comes out on top When I embroider with say RED thread and black bobbin thread, the embroidery is BLACK, instead of red. Any ideas? You need to read the section of your manual that talks ...
Question about Husqvarna Sewing Machines
...bobbin thread is coming up through the top. I have tried to adjust the tension, but it doesn't help. Did you adjust the bobbin tension first? Sewing machine tension is a delicate tug of war between ...
...bobbin thread shows through badly when embroidering using memory card I have a viking rose and when I embroider with a Husgavarna designs or any other designs the bobbin thread comes on top of the ...
Question about Brother Sewing Machines
...thread gets wound around the bobbin and makes a nest on the bottom have you tried changing the needlerethread the machine top & bobbinwhen embroidering make sure it good quality threadclean under ...
bobbin thread is coming to top when embroidering When embroidering, the upper tension should be looser than when doing regular sewing. Test it first on a piece of scrap fabric that is the same fabric ...
Question about Sewing Machines
...bobbin thread is coming up on the top of the design and the color is almost non existent. It is a full bobbin I am using 3 layers of tear away stabilizer. Suggestions? Your tension is incorrect. ...
bobbin thread was coming through on the material. Adjusted the tension to -8, sprayed the bobbin casing and area lightly with WD40, changed the bobbin, changed the thread, changed the needle, and it's
...bobbin thread showing through the embroidery. I didn't have this problem in previous projects, just the past couple of times. I've adjusted the tension anywhere from 2 to -4 and the bobbin thread ...
422 questions posted
Usually answered in minutes!
764 Questions
294 Questions
223 Questions
181 Questions
150 Questions