Brother XL-3510 Mechanical Sewing Machine "put bobbin bottom brothers" Questions

...bobbin. Do I put the thread into both the top and bottom hole of bobbin to wind? I can wind the bobbin but the thread is loose and bunches up. just wind the thread around the bobbin, don't put it ...

...but I don't know where should I put the new tire in there. Can you please help me in locating the right place to put it? Thanks The top right of the machine directly below the bobbin

bobbin. The tension is set on 4.What do I now? Hi, general rule of thumb:: loops on the top, problem on the bottom.. Loops on the bottom, problem is on the top.. When threading your machine, stop just

...bobbin tension a small amount and put your top tension at four. When you get a good stitch then you have the bobbin stitch set right. If you still can't get it set then it is probably the top tension ...

...looping on the bottom about every four inches. It seems to happen if I slow or stop the machine to remove a pin, etc. loosen bobbin thread out put---loosen little screw on the side of the bobbin ...

...put your bobbin in the bobbincase the wrong way. After putting the bobbin in the case and pulling the thread the bobbin should turn clockwise. Good luck. I have a Brother VX-1120. I'm not sure if I'm ...

...bobbin so that when it is rotating it does not go halfway around and stop the needle? put a new needle in & see if it still does the same thing & if it does the same thing check the bobbin ...

...put the bobbin case in wrong.  Try taking it out and making sure that the little stop is in the front and it is seated down in there and able to wiggle back and forth.  My experience with ...

...bobbin is busted so I put in a new class 15 and I am immediately getting huge tangles and knots - I am afraid I am using wrong type of bobbin. Can someone please tell me what the manual says to use ...