Brother XL-3510 Mechanical Sewing Machine "factory setting" Questions

...serger. What is the correct factory setting for the dial # on the front of machine and for the stitch width setting on the side? The factory settings are 4, 4, 4, 4, and width at M. Hope this

...the top tension will not resolve. The other settings you mention are all adjustable based on what you want to do with your machine, ie straight vs zig-zag stitch, etc.--no standard factory

...factory setting for a bernette 15 What the factory straight stitch setting here's a link for a free manual for the ...

factory settings for JMSM 1020 overlocker please Usually, the factory tension settings are at the midpoint between high & low number.

What are the factory settings on the Huskylock S25 for needle tension and upper/lower luppers The factory settings are usually the midway point on each dial. On most machines, it's marked in a ...

...setting back to factory settings still no memory left. Resetting factory settings in some models will only reset the settings of the machine and does not effect the stitch memory. to clear the stored ...

no tension on the bobbin and no way to set it the book says it is factory set. maybe it is just worn out. it is plastic. It may be factory set but it cannot determine the type of thread you use, on ...

...Factory setting is usually the midway point between high & low number. Sometimes it is specifically marked on the dial with a red line or a different color. Of course, this is only the general ...

...needle, changed to a new bobbin, checked threading, cleaned bobbin case. Same results. Tension at factory set 5 and bobbin tension factory set no new adjustment. As a straight stitch, tension looks ...

My grandkids turned all the dials on the Brothers XL5340, can you help with the factory settings. Thanks Forget factory settings, main one is top tension should be about 4 or 5