Print quality is very poor It sounds like your print heads may need cleaning. However, here is the link from Brother support for your MFC-5890CN on how to improve print quality: Brother MFC 5890 Print
Question about Brother MFC Office Equipment & Supplies
...i press print quality the print quality black very poor and the other three colours are fine Try to reseat the ink cartridges Then try to print or power off your printer after that then try to
...Print quality is very poor Blue is almost grey, red is more to orange,black is dull. The whole thing is very washed out. Dont tell me it is the paper quality because the HP was working fine on the ...
...are low. However, they are still at half and not empty. Even when replacing a cartridge it shows messsage and print is still poor. Help. Clean the head if problem still persist replace print
Question about Brother MFC Office Equipment & Supplies
...POOR QUALITY BUT COLOURED INK FINE. USING INK MANAGEMENT TO CLEAN PRINTER NOT HELPING. HAVE TAKEN OUT AND REINSTALLED BLACK CARTRIDGE WITHOUT IMPROVEMENT. WHEN PRINTING A BLOCK OF BLACK PRINT ...
Question about Brother MFC Office Equipment & Supplies
...print quality is OK for black and three colors. OK Poor Is Quality OK? 1.Yes 2.No Black OK? 1.Yes 2.N 8 Press 2 (No) for Black or three colors with a problem. The LCD shows: Press 1 (Yes). The MFC ...
Question about Brother MFC Office Equipment & Supplies
...print quality is OK for black and three colors. OK Poor Is Quality OK? 1.Yes 2.No Black OK? 1.Yes 2.N 8 Press 2 (No) for Black or three colors with a problem. The LCD shows: Press 1 (Yes). The MFC ...
Question about Brother MFC Office Equipment & Supplies
...PRINT QUALITY IS SO POOR. AFTER CLEANING THE HEADS A FEW TIMES I WENT TO PRING A "QUALITY TEST PAGE". The MFC said i was out of paper. i refilled the paper (with the proper type) and tried again. i ...
Question about Brother MFC Office Equipment & Supplies
...than just a poor quality ink cartridge problem? Print heads bad or dirty, as well the cleaning sponge is no doubt in need of attention. They can be replaced but the economics are spendy. Good Luck ...
...poor cop quality, light, washed out when copied from glass or feeder, but color prints from a computor are good. cleaned internal parts, drums and belt look good. Could be a faulty optical sensor or ...
443 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions