...error does the machine show up?Plz give some more info in detail!!!!! I had a similar problem, kept saying Magenta & yellow empty when not. took all cartridges out, unplugged & restarted, the printer ...
...Error I've put in four new toner cartridges into my Samsung CLP-510, and get an error message "Install Cyan Toner". When I put the old cyan cartridge back in, the error message goes away (replaced ...
error code 2551 of c220 It is a problem with your cyan image unit, see if you have put it ok other way you should change it your cyan developer is dead. change image unit, cyan
Question about Brother DCP Office Equipment & Supplies
...ink cartridge and put it on the magenta. An error message then came up saying I had duplicate magenta. When I switched them back the magenta was fine and there was only one! Dodgy chips me
Question about Brother DCP Office Equipment & Supplies
Error 1681 more than one Cyan cartridge installed My Cyan ink cartridge was low so I installed a new one. Now my Mac gives me error 1681 more than one cyan cartridge is installed-and I can't print ...
Question about Xerox Office Equipment & Supplies
...put a new Cyan toner cartridge in the C525A and I still have an error message "Cyan cartridge please load" I have pulled the cartridge in and out several times and it still comes up with the same ...
...error message that Cyan Toner is not installed. It will not clear at all. Frustrated...please help! Thanks! Hi, Please follow the solution in the link below. Also as you putting in the cartridge ...
Question about Brother DCP Office Equipment & Supplies
...error, as soon as i put it back in, it happens. I tried swapping toners, as in putting the black in the cyan etc. I have replaced the DC Controller, the PCB board. Any ideas? try this one...this ones ...
Question about Brother DCP Office Equipment & Supplies
...error saying that the ink Cartridge Light Cyan is empty or removed (But I just put a brand new one in and it is full). I have tried removing and reinstalling the new cartridge many times to no avail. ...
...you want. In your case remove them all and put the cyan in the black slot and see if the error goes away. If yes, put the black in any empty slot. If the error returns, the black is definitely
290 questions posted
Usually answered in minutes!
422 Questions
374 Questions
395 Questions
242 Questions
120 Questions
