Question about Brother HL Office Equipment & Supplies
...be back in business. To prevent the problem in the future if you are not using the printer turn it off and if the power goes off while printing get the printer turned off before the power comes
off the power, but the lights just keep blinking. OK figured out the sequence to resolve this error: power off unit unplug power cable for 1 minute reset the power cable open front door press and hold
...power. Now, off generator power, all the lights blink. It will not print out a test page. I have tried turning it off and unplugging. Anything else to try? unplugg it and leave like that for 5mins ...
...off the power. I have to turn it off and back on. Now it gets most of the way thru the boot cycle and shuts down. Pushing the front button does nothing -- power has to be removed. It does this hot or ...
Question about Brother HL Office Equipment & Supplies
...an adapter for the power Are you pressing the big button on the front that looks exactly like an on/off switch? because the real on/off button is small and black, and on the side panel by the
Question about Brother HL Office Equipment & Supplies
...power was lost for a half-second) and then the PC just shuts OFF. No shutdown, or anything, just off. The printer then spits out a (usually) blank page. Any ideas would be appreciated! With symptoms ...
power switch shut off will not hurt anything but save you on eletric bills. Shoot you could even pull the plug and still get away with nothing happening but if you do not plug it back in then you know
...power off and back on but the same problem. What's happened, and what do I do? Nearly all later printers have circuits that stay 'alive' even with the power turned off. Try pulling the AC plug ...
Question about Brother HL Office Equipment & Supplies
...Power switch, as OFF is OFF, now matter where it is done. It is all explained in your user manual, link below. http://www.retrevo.com/support/Brother-HL-2140-Printers-manual/id/11191bh243/t/2/ Just ...
Question about Brother HL Office Equipment & Supplies
...this machine will power itself off if there is a fuser heat control issue. The fuser is AC and the power off is a safety feature to prevent a fire. Take the printer to a qualified repair
21 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions
