...light goes on, not blinking, and no copies come out of the printer. tray this The procedure for the factory inspection mode is as follows. (1) Turn off the printer power switch, open the front cover, ...
Question about Brother HL Office Equipment & Supplies
...error light are on - got new cartridge - installed as directed - blue light will not stay on - printer will not print - red and orange lights will not go out I can't recall the buttons on Brother ...
light goes back to alarm abd does not print Pull the drum out the front door, remove the toner cartridge and check for any paper and remove it. Make sure there is toner in the toner cartridge. Look at
...light up with one of the combinations shown in Table 1. See Table 1: LED indications while pressing Go and Job Cancel on page 3-6 to identify the error. Something has failed that the printer can't ...
...even with the power turned off. Try pulling the AC plug overnight' this should clear most stored errors that may still be
so after waiting 15 or 20 seconds I power-cycled the printer and it came back up fine - no more E50 error
...error message comes back and will not print, the toner light stays on. When it says to clean the corona, on the drum there is a purple tab that moves from one side to the other. run it back and forth ...
error message, just poor quality printing. OPC belts appear to need changing fairly often - I am on my third. Take it out and have a look (note that it is light sensitive, do it quickly in dim light).
...light. What does it mean. I tired holding the blue power button down but that did not work. Please help. This indicates a Service Call Error. Turn printer OFF, wait a few seconds and then the printer ...
...ERROR LIGHT CAME ON AND STAYS ON. WHAT CAN I DO TO GET IT TO PRINTING AGAIN? Try turning the printer off and back on. if this doesn't help, open any cover that will open and look for paper still in ...
488 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
249 Questions
188 Questions
