...printing fine. Any suggestions? Read your manual. There is a counter that goes off, that can be reset when you change the drum. With power on and front cover open press set, then select reset ...
Question about Brother MFC Office Equipment & Supplies
...installing new toner and drum, did you reset the drum counter after replacing the new drum? Open the front cover and press the option button... then just select reset drum counter...and press
...message went away but after printing couple of pages it came back, any ideas?Thanks,Jay Yup reset counter, must open front door and press set button then arrow to replace drum and yes, press
...drum and yes/ok close cover will reset bias voltage aka light copies, to suit new drum i need to reset my drum for a MFC-8860DN brother copier? How would I do this. I cant locate my instruction ...
Question about Brother MFC Office Equipment & Supplies
...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...
Question about Brother MFC Office Equipment & Supplies
...end" although the Drum is brand new. open the front cover and press the clear back button then select the yes option to screen menu Is the print well printed? I can give you the reset drum
Question about Brother MFC Office Equipment & Supplies
...Reset Menu. 11) Press the scroll keys until Drum is displayed and press OK.I hope this can be helpful for you. Hi When you load the new toner cartridge and still there is drum near end messge. Just ...
...reset the drum counter. This is a very important step when replacing the drum as it actually changes the voltage setting for the dc power regulator. If not performed, and a partially used toner ...
...HELP Go to menu to reset drum settings. I think you leave the front cover open press the right arrow then 1 one the lcd shows replace drum then after the lcd says accepted close the front
Question about Brother MFC Office Equipment & Supplies
...lines are combination of thin and thick lines you really need to replace the drum instead of just resetting it. Just examine the drum if there are scratches.
269 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions