Brother MFC 210C All-In-One InkJet Printer "rear paperjam paper" Questions

...paperjam in the machine. It reads back cover open because the piece of paper is covering the sensor for the back cover. there is a clip at the right side if you open the rear cover.. check if that ...

...2", its related fuser unit, kindly open the rear cover of printer, ther you can see the fuser unit. check the one liver from fuser unit to HVPS . kindly check all these things and ...

paperjam on mx360 conon Switch off turn to access the rear, release catches backing will drop access to rear, remover paper if there, alternative on top where you feed paper for faxing or copying lift

...paperjam in the rear door after opening and closing the top cover, There is no paper stuck anywhere in the paper path. any one out there come across this before and been able to solve it? Remove tray ...

...paperjam. I open the rear cover and the paper will feed out the back, curled but will not jam the feed Try replacing all paper. Sometimes paper that is overly humid or has gotten wet will curl. ...

PAPERJAM ON A LASER JET III AND CANNOT SEE A PAPER JAM OR FIND MY MANUEL Try looking for the jam from the rear of the printer. Also, using one of those compressed air cans, blow all the paper dust our

paperjam 1. Clear the paper jam a. turn the printer off and unplug the power cord from wall outlet b. check if there are paper jammed in the input and output tray c. check if there are paper jammed in

...rear tractor and i have confirmed all sensors.there is no paperjam atall.it taking the paper smoothly whenever i press the load eject button but instantly shows set paper again message.please advice ...

...paperjam but there is no paper in it Check the back of the printer. There should be a removable rear panel. Just Pull back on the lever (I believe on the right side) The rear panel will come off. See ...

...paperjam then press ok first of all check for any papers on the printer rollers by opening the rear panel of the printer now clean the rollers with a soft cloth still have the same problem then press ...