Brother MFC-5440CN All-In-One InkJet Printer "scanner line down page" Questions

...scanner? I have a big line going down the center of the page when I copy or fax from there. Thanks! Hello, If you lift the top of the unit so that you can see the scanner glass and clean the surface ...

...line. Is it solid and think with well defined edges or is it a small thin and dotted? If it is solid with strait crisp edges you will need a new scanner. If it is just a small somewhat dotted you ...

line down the left side of the photocopies If this only occurs with copies (not with printed jobs), then your problem is most likely dust/dirt on the scanner (not necessarily the glass), or on the ...

down, close to each others on the printed page. When I copy a page from the scanner glass, or print an MS Word document, the printed pages are normal. I received a fax recently and the prints were OK,

...line), while the scanner stands still. When you lay it on the flatbed, the scanner moves accross the paper while the paper obviously stands still. This is why you get the line from the ADF but not ...

...down the length of the page. I have recently replaced the drum and the toner. HELP As the fax receives and prints incoming faxes ok then the print engine is working ok. the fact that the problem ...

which causes lines down your copies. Clean it with alcohol which will dissolve the sticky stuff and the whiteout. If this does not solve the problem, the CCD scanner in your machine might be going bad

...line down it one inch in from txt? If you are scanning from the ADF - open the scanner cover and clean the narrow glass plate at the left end. It is usually caused by a speck of dirt or white out on ...

...line from both then you may have debris on the scanner mirrors. The scanner unit that travels back and forth under the glass would need to be cleaned if this is the case. The glass would need to be ...

...line down the right margin of the page. scanner glass is clean and no white out or paper stuck over the glass. ?could this be scanner lamp failure? ?can this be fixed? Have you tried a new toner and ...