Question about Simpson Washing Machines
...domestic well as water supply? Sometimes fine sand from a domestic well will plug the valve screen. It is also possible that other mineral would plug the screen. These things would happen gradually, ...
Question about Zanussi Washing Machines
...hose, d) failed hot water solenoid valve or bad / of loose wiring connection inside the washer or 3) depleted hot water in domestic hot water tank due to previous laundry washes / bathing /
...domestic hot water tank. There will not be a problem with using cold fill to both inlets but you can expect some of the hotter was programmes to take longer than expected as the water will have to be ...
...domestic supply is regulated to 400kpa). Whatever the case may be, I have noticed that my house has what appears to be rather high water pressure (subjectively of course). So, first I checked the ...
...water heater element has given up. This is an item similar to the element you would see inside your electric kettle down at the bottom (though much larger). It is replaceable but depending on the ...
...domestic appliance repair shop should be able to supply an exchange unit. If you attempt the repair you should check that the drum has not damaged the water heaters as it may have been these that it ...
...domestic drain pipe and re-connect to the power supply. Select a drain cycle (or rinse cycle) and switch on. Listen for the pump running and water being pumped away down the drain pipe. ...
...water from the supply lines into your wash tub. On domestic washers, there are two lines, one hot the other cold. These valves are susceptible to mineral build-up and sediment deposits. There are two ...
Question about Amana Washing Machines
water has drained completely, remove the drain hose from the pump and check that the drain hose is not blocked. 4] If the hose was clear, and the pump was running (in tests [1] & [2] ), it will be
...water inlet of the machine. The domestic supply was also set to 80 centigrade in my daughters flat so all the machine settings were over ridden by the supply temperature. Thank you for offering me a ...
131 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions