Hotpoint Ultima WF860 Front Load Washer "clean filters wt960" Questions

...wt960 the washing machine is starting to smell when empty. do i need to take the front panel of the machine off to take out and check the filter? Filter is located inside large black hose at rear of ...

...wt960 Washing mashine, now tripping electric. Have never been able to find and clean filter - ?is there one? I have cleaned the detergent drawer and door seals. Run hot service washes, machine still ...

wt960 and if so how do you access it To locate the filter you need to remove the lower rear cover of washer. Remove the large black hose fastened to bottom of drum. Remove and clean filter inside hose

...WT960 What does this code mean. It has come on the screen after the final spin, which incidentally does not leave the clothes as dry as they normally are. Check and clean the filter and drain hose. ...

WT960 Hotpoint can you expand a little, why are you asking this? do you mean the little strainers on the water coming into the machine (if you take off the inlet hoses you can see the metal mesh) Does

...wt960 ultima will wash but finishes without spinning Error F-02 is a slow drain problem. Remove rear cover of machine after disconnecting mains cord from wall. Remove the wide pipe from the base of ...

...filters. Turn the taps off and remove both hoses at the washer end. Inside each inlet port there is normally a little filter which should just slide out. Clean if necessary and replace each one and ...

...Clean any obstruction and reassemble. A 30 minute operation. hi its a pressure switch fault, but its more than likely that the pcb control is faulty, very common on this appliance... not a job for a ...

...clean the filter on a wt960 washing machine Hi andrewdoe71, Please check my tip below: ACCESS, DRAIN & CLEAN THE DRAIN PUMP FILTER Kind Regards :-) * If you found this solution helpful, please ...

wt960 with an F-18 what is it and how can i fix it Hi, F18 means pump is blocked or broken, clean filter first, no result change then you have to change the pump. I also had this problem - the machine