Hotpoint Aquarius WF000 Front Load Washer "wf541 lights" Questions

Ad

Question about Hotpoint Washing Machines

2 Answers

hotpoint WF541 fault cycle stops before drain, flashing light "MINI LOAD". CHECKED FILTER AND PUMP ROTATION- ok washer wont fill with water bad main control board

Ad

Question about Hotpoint Washing Machines

1 Answer

hotpoint aquarius WF541 won't finish a cycle it won't finish a cycle i need to put it to fast spin and the lights flash on mini load What is the model number? Look inside the door area.

Ad

...wf541. Am trying to unscrew and remove pump filter at front to clean and check for blockages as lights keep flashing. Kick plate removed ok. turned filter anti clockwise as oer instructions but it ...

Question about Hotpoint Washing Machines

1 Answer

WF541 Hotpoint When i press on/off switch the light flashes with wash enhanse and reduced creases but will not do anything else. This machine is 14 months old not used a great deal but is out of ...

Question about Hotpoint Washing Machines

1 Answer

...wf541 fault f09 lights 1&4 eprom/setup error Hi from retired Englishman in SW France, That/those require(s) an engineer- I'm sorry ;-0( If this has assisted you please consider a 4 thumbs up ...

Question about Hotpoint Washing Machines

1 Answer

...WF541 problem reduced creases and mini load lights are flashing and the machine wont empty. Just had the circuit board at the back replaced Technical Fault is Pressure switch jammed on empty: check ...

Question about Hotpoint Washing Machines

3 Answers

aquarius hotpoint wf541 wont pump the water out at the end of the cycle You need to clean the filter. Remove lower rear cover of washer. Locate and remove large black hose fastened to bottom of drum. ...

Question about Washing Machines

1 Answer

...wf541 flashing lights code 3and 4 flash could be thermister/heater how do I take top/back off to test them.any manual or exploded view. hiya m8 how old is this washer if its over 5years then youll be ...

Question about Washing Machines

2 Answers

...WF541. It sounds like it's taking in water (certainly going into the drawer) but does nothing else except these flashing lights: on/off, mini load and rinse hold. The manual says if mini load, rinse ...

Question about Washing Machines

2 Answers

...WF541 washing machine not working all the lights are flashing on the front, nothing happens even if you press the buttons? Please help hi, i plugged mine out and back in again and it reset. you need ...

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

705 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...