Hotpoint Aquarius WF000 Front Load Washer "wf220 flashing lights" Questions

...wf220 front loading washing machine, drum wont turn but motor sounds like it is trying though, can turn drum by hand but only a small amount with alot of effort. all lights were flashing when i ...

...wf220 wshing machine which is not spinning the pump is working and the on/off lights and mini load lights are flashing i have a hotpoint wf321 water comes in and pumps out have flashing mini load ...

...into error, the lights flashing give a code, more info needed like model number? and which lights flashing. As i said, if its ALL the lighst then new power module needed. Please rate my help. Thank ...

all the lights flash when i turn the machine on there is a fault in ur machine best thing to do cheak the motherbord for any burn marks, cheak the pump or call an engineer hope this helps :)

dishwasher stays on prewash cycle, prewash light flashing, appears no water getting through though appliance makes noise as normal motor sounds to be running Actual model is FDW20 this could be one of

flashing lights and error message f-05 on hotpoint aquarius check water pump filter, it may be blocked or jammed Tour machine 's pump is not working or drain system of your machine is defiantly stuck ...

Believe connected correctly but won't work. Have connected hot and cold hoses, drain and power. Switched power on and power on light comes on but flashing not steady. Start/stop switch won't work. Any

...wf220 washing machine when i switch power on, all display lights illuminate for a second then go off. Then there seems to be no power to the appliance at all. i then have to switch off at the plug ...

my hotpoint waser on/off light flashing and mini load On mine it was the pressure sensor. remove the top cover and its clipped to the side of the washer behind the soap tray. it has a clear plastic ...

Door light flashing and unable to use the washer If you have ascertained that the door is closed properly, and that the door handle does not feel floppy or weak, then chances are it could be faulty ...