...lid switch is shorting and causing the board to die? I don't want to spend another $200 on a main board when I can get a new washing machine for $750. The main board is under warranty though, so I ...
lid may have broken off. That would be the timer switch. If it runs when you put it on a certain cycle, then your motor is good. The problem is in the switch sounds like maybe the brake on the trans-I
...lock mode. I have tried everything including leaving the machine for hours, re-washing, turning on/off and taking the plug out but nothing is curing the problem. Can anybody help with the solution. I ...
...lock. Pull this down, it releases the mechanism.under the door there is a seam, there are 3 screws in that seam to remove to access that bottom panel.. you will need the instruction manual for this - ...
...without locking into the bottom of the agitator you need to replace the dogs,let me know what you find and send the full model number that's on the machine,look at the opening where you put the ...
...without lcd display is unable to drain or spin. it occurred after I advance the wash cycle from wash to spin. the washer stopped abruptly and failed to drain or spin from then on. It is full of water ...
Question about Fisher and Paykel Washing Machines
...lock then the washer may not start. The main control board on most washers is complicated and difficult to diagnose without proper test equipment and procedures. You can visually inspect the control ...
Question about Fisher and Paykel Washing Machines
...not illuminate even though lid is closed. I've checked the motor, it feels hot to the touch and is able to spin but not very freely. mine is an older fisher paykel model without lcd display. pls ...
Question about General Washing Machines
...WITHOUT WORKING LID CLOSED SAFETY LOCK. you could break an arm / hand. i slid top off washing machine and moved lid switch back so ' lid pin ' would contact safety switch. if this is the cause, you ...
Question about Frigidaire Washing Machines
...without feeding the black mold. You will be surprised. The chemist described how a tiny amount does all that is necessary to rearrange the molecules to make dirt magnets. The detergent manufacturers ...
705 questions posted
Usually answered in minutes!
886 Questions
666 Questions
485 Questions
500 Questions
151 Questions